50Hz/60Hz Wood Piece Milling Machine Mxz7203

Technical parameters:
processing length :250mm           
Processing width            360mm
processing thickness            125mm minimum processing
main shaft diameter Φ 35mm backup wheel diameter           
Spindle speed of Φ 100 mm            6850pm
spindle power            4kw × 2
feeding power 0.75kw feeding speed 2-3m / min
feeding lifting power 0.37kw hydraulic motor power
table size            1260 × 608mm working pressure           
Diameter and dimension of pressure suction port of 0.6-0.8mpa
hydraulic system (length × width × height)            1285 × 15150 × 1120mm
net weight 880Kg           
Special introduction: professional dining table chair sofa production equipment           
It solves two problems for furniture manufacturers           
1: High efficiency and easy to use, the machine is easy to operate, and the efficiency is increased by 6 times, so as to reduce the labor and reduce the production and management cost of the enterprise           
2: Safety guarantee: This machine is totally closed operation. When bending and milling, there is no need for manual feeding. All materials are fed in and out of the machine through the whole process. There is no potential safety hazard. It can completely solve the industrial accidents for the enterprise.

Working conditions
Ambient operation temperature: It may vary with the changing weather but never exceeding 40ºC;
Altitude: Not more than 1000m;
Rated frequency: 50Hz/60Hz;
Rated Voltage: 220V/380V;